clock source用于为linux内核提供一个时间基线,如果你用linux的date命令获取当前时间,内核会读取当前的clock source,转换并返回合适的时间单位给用户空间。在硬件层,它通常实现为一个由固定时钟频率驱动的计数器,计数器只能单调...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Enable the block layer -- Partition Types
[ ] Advanced partition selection翻译:高级分区选择说明:如果您想在Linux下使用硬盘,而这些硬盘是在运行与Linux系统不同的体系结构的操作系统下分区的,请在此处输入Y。注意,这个问题的答案不会直接影响内核:说N只会导致...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Enable the block layer
Legacy autoloading support翻译:旧版自动加载支持说明:Block layer SG support v4 helper lib翻译:块层 SG 支持 v4 帮助程序库说明:你不需要手动开启此选项,如果有其他模块需要使用,会被自动...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Enable loadable module support
--- Enable loadable module support [ ] Module debugging [ ] Forced module loading [ ] Module unloading [ ] Forced...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- General architecture -- dependent options
KprobesOptimize very unlikely/likely branches[ ] Static key selftest[ ] Static call selftestEnable seccomp to safely execute ...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Virtualization
< > Kernel-based Virtual Machine (KVM) support< > KVM for Intel (and compatible) processors support[ ] Softwa...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Power management and ACPI options -- CPU Id
-- CPU idle PM support tandby[] Ladder governor (for periodic timer tick)-- Menu governor (for tickless system)[ ] Timer ...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Power management and ACPI options -- CPU
-- CPU Frequency scaling[] CPU frequency transition statistics Default CPUFreq governor (schedutil) --->-- 'performanc...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Power management and ACPI options -- ACPI
[ ] AML debugger interface[] ACPI Serial Port Console Redirection Support[ ] ACPI Firmware Performance Data Table (FPDT) ...
阅读全文...
阅读全文...
Gentoo 6.6.13 内核配置选项 -- Power management and ACPI options
[] Suspend to RAM and standby翻译:挂起到RAM并待机说明:"休眠到内存"(ACPI S3)支持.也就是系统休眠后,除了内存之外,其他所有部件都停止工作,重开机之后可以直接从内存中恢复运行状态.要使用此功能,你需要执行"ech...
阅读全文...
阅读全文...

